Daily

Aircraft Engines and Bike Engines..

한국어로 읽기 →

Among the major courses I’m taking right now there’s one that covers aircraft engines, and an engine is an engine after all, so it’s a lot like a bike engine. Of course there are many differences with aircraft, but the basics and all are the same, I’d say.

Enjoying bike life and building up knowledge through my search-fu so I could do basic maintenance myself, at some point I found myself knowing it all: ah, this is this, this does such-and-such, etc. What the structure looks like when you open it up, what things are called, what they do and so on. Of course it took a long time to get here, and I don’t think I know everything yet. I can do very basic maintenance myself, but maintenance needs a lot of equipment, so I couldn’t do it all.

Picking up knowledge about bikes out of interest made me curious about engines too, and going into the class already knowing a lot about how an engine is structured and what it looks like on the outside.. and how it works and how it’s cooled, etc., I was able to enjoy the class even more.

One of the things I learned today is that on the outside of an air-cooled engine there are things called fins that increase the surface area in contact with the air to dissipate heat more effectively, and at first I didn’t know what these look like to do that job. When I asked the professor, he said they stick out from the outside of the engine in a radiator-like shape. Come to think of it, I once took off the lower cowl on my Comet 650 to take a look inside after changing the engine oil, and I remembered seeing radiator-shaped things attached to the two cylinders of the two-cylinder Comet. Sure enough, when I looked it up, that’s exactly what they look like.. Linking it to my own knowledge like this, I think I can enjoy the class more.

The difference between carburetor and injection systems, their pros and cons, and the wet-sump and dry-sump types of oil system, etc. For oil systems, bikes are probably all wet-sump types. In a dry-sump type the engine oil tank is separated and two oil pumps operate. One is the scavenge pump, which sends oil back to the oil tank, and the other is just the oil pump.

And from carbon fouling on spark plugs, to replacing a spark plug when its gap widens and causes misfiring, there was a lot that’s easy to understand if you can do just a little DIY maintenance while riding a bike, so it helped a lot.

Engines have a lot that sounds really complicated when you first hear it, but having already experienced those things and then taking the class feels like having done the reading ahead of time, so to speak.

It’s nice being able to enjoy the class, heh

Related

Leave a comment